264 – Choosing the Right HVLP Turbine Sprayer

Marc – On today’s show I’m
going to give you some tips for buying one of these, and HVLP turbine sprayer. And the Wood Whisperer now
features 50% less thyroid. – [Voiceover] Hit it! (upbeat music) – So I don’t want to go too
far on a personal tangent, but I did just have surgery, had half of my thyroid removed. Maybe TMI, but there was a growth there. It turned out to be benign, but it was causing me
issues, and it had to go. So I’m healing up from that,
got a nice, sweet scar. Chicks dig scars, right? So there’s that. All right, let’s get to our email. Brian Prusa wrote in to ask, “I’m buying a new spray system. “Should I save up to buy a FUJI Q5, “or do you think an Earlex or
Rockler turbine will suffice? “it’s quite a large price difference!” Well, I happen to know a little
something about turbines, and I’ve got a few right here. But first, it’s disclosure time. Well, as you can see, I’m
pretty much a Fuji man. I’ve tried a lot of different
systems over the years. Fuji is one of my favorites. I’ve been lucky enough to establish a working relationship with them. But I’m not here to
sell you a Fuji turbine. There are a lot of good
brands on the market. You should look into them all. You’ll find that there’s
quite a few similarities in the higher grade turbine systems. What I show you here you might find applicable to other brands as well. Brian asked pretty much
about the top of the line, and sort of what would be the
bottom of the line, I suppose, and what the differences are. So let’s go through, because we kind of run the gamut here. When it’s all said and done,
you’ll have the terminology and all the tools you need
to look at these things and decide which unit is right for you. Let’s get to that terminology. HVLP, most of you probably know this. It stands for high volume low pressure. The idea is, lots of liquid coming out but not a lot of air. That limits the amount
of overspray and waste, so it makes it a much
more efficient process when it’s high volume low pressure. So, what’s a turbine? Well, you’re looking at one. Basically it’s a simple
box that contains a fan. That fan blows air out into a hose, which connects to a gun, and that’s what sprays the liquid. The advantage of these things is that they’re super portable,
easy to move around, and it’s a fully self-contained system. You might have heard the term stages with reference to turbine. That’s really a reflection of the power. Now, I don’t have everyone here, but I’ve got a single stage, a 3-stage, 4-stage, and a 5-stage. The more stages, the more power. Stages really are nothing more than the number of fans inside. So a single stage will have one fan. 5-stage has five fans, and that just pushes more air out, and it makes it a more powerful unit. Now a final term is viscosity. This little guy here that
comes with the turbine system is called a viscosity cup. The idea with viscosity is it’s the thickness of the material. So is it like pancake batter, or is it like orange juice? You basically pick up a
certain amount of your finish. Obviously this is just water. The idea is you have certain time ratings for how long it takes it
to lose all of that liquid, and the thicker it is,
the longer it takes. Most manufacturers will
give you guidelines to say, dilute your finish
until it can run through the viscosity cup in this
particular amount of time. That’s how you gauge whether or not the unit will be able to atomize the finish you have on hand. Some finishes are just too darn thick, or the unit is not
powerful enough to push it. A thick latex paint, for instance, is going to have a whole lot of trouble in the lower powered units, but not as much trouble
on the higher powered. You might be able to dilute it to work on the lower power. You may not have to
dilute as much, if at all, if you’ve got a higher powered unit. Let’s talk pricing. This is pretty much an entry-level unit, sold by Rockler. You can find this also, very similar one, looks exactly the same, at Harbor Freight. It’s going to be about $115 to $149. A lot of times you can
get it on sale for $99. Single-stage unit, lots of plastic here, so this is not going to be the most durable thing in the world. But it can get the job done, especially if you’re just doing
clear finishes and stains. Now a 2-stage unit is
probably going to run around $300 to $400, and a 3-stage unit like this Fuji Q3 is going to be about $600 to $900. A 4-stage unit is going
to be at least $1,000. And a 5-stage unit also
starting at around $1,000, but most going up and approaching $2,000 Well, how do you know which one to buy? Well, it depends on two primary things. Number one, ask yourself,
what are you spraying? If you do mostly clear
finishes and stains, all you really need is
a single-stage unit. But these tend to not be built as well. You might not get as good results just because of the build quality. So people like to go a little bit higher. But I really don’t think you need to go much higher than a
3-stage to get good results with simple, standard
woodworking finishes like this. If you’re going to spray
latex occasionally, I would say get at least the 3 stage. If you’re going to spray latex a lot, you want to look at your
4- and your 5-stage units, depending on how much you’re
going to wind up doing. But you really need that extra power to push a thick-bodied finish and atomize it properly out of the gun. Now the second question to ask yourself is how often will you be spraying? If you’re a weekend warrior
and maybe you’re spraying every couple of weeks to
every couple of months, a system like this, the
Rockler or the Harbor Freight, will probably be just fine. But, if you’re on the road, you’re throwing this thing
into the back of a truck, maybe you have employees and you’re in some commercial setting, you really need a more powerful and a more durable system. Now what we’re talking about here is overall build quality, which does get better as you go to those higher-stage units. Let’s look at some of the
details in the equipment. Now let’s start off by taking a look at the Rockler gun. All right, it’s capable. But clearly it’s all plastic. You’ve got some metal parts here, but the majority is a rigid plastic. You’ve got a flow
control knob on the back. That’s pretty standard. You’ve got the ability to
adjust the fan orientation, so vertical to horizontal,
or something in between. But that’s really about
it for the adjustments. Your needle and cap set is in here. That’s of course
interchangeable with other sets. And you have a plastic canister. Now I don’t really like that. Plastic tends to not be
the most durable material. I really prefer metal. I also don’t really like the threads. If you get a lot of
gooped up finish on there that can sometimes create problems in putting the unit
back together like this. The other thing is you have your air hose coming in at the top above your hand. Sometimes people like that. Sometimes they don’t. It could be uncomfortable, and
you also might have trouble accessing the flow control knob here when there’s a hose right above it. Comfort-wise, not too bad, considering what it’s made out of. You do have to think about that, because you’ll be holding this thing for long periods of time. Now as a bit of a contrast, let’s take a look at Fuji’s gun. This is a fairly high end unit here. Lots of metal, looks really well made. Of course we’ve got a
simple flow control knob, very similar to the other gun, and also the ability to change the orientation of the fan. But we have an additional setting here. This little knob allows
us to change the pattern. Whether you go from a wide pattern that sprays very wide,
or something very narrow to get into tight places, you’ve got that control right here. Stainless steel, metal cup, metal parts for this little
siphon dealy-whacker. Of course, Fuji has some
other things you could buy, like filters and things
you can put on there. Clearly a much more durable unit. Another thing is, your hose
is connecting at the bottom. I mentioned before having
the hose go over your hand blocks that flow control knob. We don’t have that problem here. The hose is going to connect right at the bottom of your hand. Now when it comes to the hoses, the differences are pretty substantial between the inexpensive
units and the pricier units. You can see with the Fuji hose we’ve got a nice, rubber, durable hose, really nice quality connections, and some cool add-ons that
you can put on the hose that make it a little bit
more durable and usable. You can run this over with your truck, it’s going to be fine. We also have an extra regulator for even more control over the air flow. Just a simple plastic
hose on the Rockler unit. Nothing wrong with that, but it might not necessarily stand up to
the abuse of a job site. Now the final thing to
consider is something that affects your versatility, and that’s the variety of
needle and cap sets available. Cheaper ones generally have one or two, and the more pricey units will have a whole range of sizes that allows you to spray all kinds of finishes, so you can have them on hand. Just depending on the thickness, or the type of stuff you’re spraying, you could swap these out and
have the best spray possible. So what’s the conclusion? Well, if you’re spraying
clear finishes and stains and you’re not spraying all that often, go with a 1-stage unit. They’re pretty handy,
they’re very inexpensive, and it gets the job done. But if you’re going to spray quite often and you’re still sticking with those clear finishes and stains, consider a 2-stage unit. Now if you want to get a little bit into latex paint for the occasional spray, at least 3-stage. You can certainly go higher, but you can probably get away with 3-stage for a lot of those latex paints. But some of them are
going to be very thick. The more you dilute the latex paint, you’re kind of screwing
with the chemistry, and you’re probably going to want to use an additive, a thinning additive, instead of just water. So if you’re going to have to deal with all that stuff a lot, and you really know you’re going to be spraying latex a lot, you’ve got to go up to that 4- or 5-stage, because that’s going to let you spray those thicker finishes without having to dilute them so far, and you get better quality out of it. If budget just isn’t an issue, I would say go about 4-stage. You’re going to cover your bases. I think only pros who are really going to beat the crap out of these things and use them constantly
will need a 5-stage unit. All right, so, it’s a little anticlimactic to talk about spraying and
not really do any spraying. But I don’t want to do a full run-off test on all of these units. So let’s grab some paint just for fun, because that’s really the test that hurts these things, right? Let’s see how the Rockler unit does, and then I want to test that Fuji Q5 because it’s super powerful and probably could shoot
a hole through the wall. We’ll just put a couple
of scoops in the cup, and believe it or not, this is the color we let my son paint his room. It is awful. Now as I mentioned before, you really want to use something called Floetrol for this, but for this fun little experiment water will do fine. Generally 5-10% is a good dilution. You don’t want to go too
much higher than that. But, you know, for thicker bodied stuff you may need to go a little bit higher. We’ll see how we do. Let’s get this guy set up. My buddy Ron actually was doing an install at one point and asked me for some help. This is the unit he had, and he had to spray a bunch
of cabinets with this, I think we were just doing a white primer and then white paint. He swears by it. For the price and what you can do with it, he loves it. We got all these cabinets sprayed down, and it was effective. It got the job done. Now let’s plug it in,
get our hose connected. Now we can certainly
mess with the dilution a little bit more. We can mess with the settings,
the needle and cap set. But you can see it’s very
a orange-peely finish, kind of blotchy. What that means is it’s spitting out large chunks of paint, as opposed to atomizing it evenly into
a nice spray pattern. So that’s not ideal,
but not too unexpected for what this unit is. Now for the Fuji. I’m not going to dilute this at all. This thing is a 5-stage. It thinks it’s all that. Let’s see what it can do. Now the Fuji has a lot
more settings to dial in, and obviously I’m kind
of rushing through this. You could spend quite a bit of time getting the perfect settings for that. But even with no dilution, the orange peel factor is better. There’s still a little bit here, but this is definitely getting closer. So with a minor amount of dilution, this particular paint, and maybe a little bit more fine tuning, we could probably get a killer finish. But the gun certainly had no
problem pushing this through. Well, not too bad. That’s what five stages does for you. Now, look, I realize that was a completely unfair comparison. We’re talking a high end unit and an entry level unit. Of course one is going to
do better than the other. But that’s the easiest way to show you something like this, because if we look at each individual one it’s shades of gray, or shades of orange, as you go up in quality, right? So this is a good way to show you how a higher powered unit
is much more forgiving. For me, I’m not really that patient to get all the settings just perfect and my dilution just perfect. I like a more powerful unit because it’s much more forgiving for someone who’s a little bit lazy in how they change and
tweak their settings. Whatever one you choose,
just get into spraying. I really think it’s a great way to go. Nothing wrong with a hand-applied finish. But once you get into the spraying game, it’s kind of hard to turn your back on it. All right? Thanks for watching, everybody. Be sure to hit Subscribe and Like, and all that fun stuff that we do. Thanks for watching. See you later. (light upbeat music) Oh, you’re still here? Well, thanks for watching
to the bitter end, and here’s your little prize. You have a chance to win this HLP turbine from Rockler. I really don’t need it, and I only bought it to do this episode. So I’m going to clean out
this garish orange paint and send it to someone who leaves a comment in the section below that says, I don’t know, “It’s not a Fuji, but it’ll do.” If you leave that commend,
I will message you, let’s say a week after this video releases we’ll pick one winner,
and you’ll get this unit. Pretty cool stuff. Thanks for watching, catch you next time.


  • TheGearJunky

    It's not a Fuji, but it'll do. Yay Rockler!

  • John LeMay

    it's not a Fuji but it will do. thanks for the chance and the info

  • nunya your business

    very informative videoespecially for someone new to turbine systems

  • Cesar G

    If spraying latex paint why not buy an airless sprayer as they're meant for spraying latex. For the cost of the Fuji 3 you could buy a professional airless you can use to paint an entire house.


    I'll keep my SATA jet 4000 B

  • David Clink

    WW is a great resourse, no argument. I have extensive spray experience with pressure systems. I have also painted some friends houses with a rented airless sprayer. Spraying latex is not as critical from a finish perspective. aka It dries flat. I wanted to try them for years after visiting wood shows but the finish I saw never sold me. Of course Earlex was only spraying water. When I'm spraying guitars and things with a gloss finish the spray pattern is much more critical. To date I haven't seen any HVLP system produce a quality gloss finish. (haven't ever used a Q5 either). I bought the Rockler/HF unit to spray some semi-gloss latex on a wood counter top I made. (didn't feel like using the big compressor) A flaw in the units books was how to apply the viscosity to a given paint e.g. seconds-dilution) Just like you didn't use it to match to your paint. I had to write them to ask how to match the flow rate to a finish. 25-35 seconds was the answer. I'm told latex can't tolerate more than 5% dilution. I didn't dilute because I wasn't sure. Used the 1.0 needle and sprayed. OK but not sufficient flow for a wet pattern. With proper dilution it might have sprayed just fine. I did subseguent coats using my regular compressor and gun. So I still can't support painting things like cars or other glossysurfaces with this type of HVLP unit regardless of costs. Of course I am judging based on little or no wet sanding and buffing. WWGOA has a great video on how to set your spray gut to the correct flow, but no formula to match flow to thinning. So for now 25 to 35 seconds through the cup is the only standard I have for single stage or maybe Q5.

  • alwaysrockn2009

    Great video!

  • Big Swifty

    The biggest issue when selecting a turbine system is whether or not the gun that comes with the system is a bleeder gun or a non-bleeder gun, i.e., is air always coming out of the air cap or not when you let off on the trigger. A bleeder gun allows air to constantly travel through the gun and trigger controls only the material that makes its way to the air cap. A non-bleeder does not shoot air, when you let up off of the trigger the air stops as well. In terms of dust and trash in your finished surface having a non-bleeder gun is vital.

    Just a couple of notes, the high volume in "HVLP" refers to the huge volume of air (cfm) and not anything to do with the volume of material. The volume of material is controlled by how much the cup is pressurized. That will lead me to my second point, in that the cup is pressurized, there is no siphon tube. It's just a pick-up tube. These guns can be used with an attached cup or a remote pressurized pot, or even an hydrolic fluid delivery system.

  • fred harlow

    THANK YOU!!!!!! I have been a painter for 25 years. I have used them off and on for years.I was looking to buy a system for clear coating wood. You have the best review I have watched. You educated me. Thank you

  • Greg Ruhl

    What do you think . Of a 890 Wagner

  • Jamil Olmos

    thank you, I have a question how about painting furniture with polyester or polyurethane which one do u recommend 3, 4 or 5 stage?

  • Georgia Fan

    Is there an issue with the hose decoupling or tearing away from its pressed-on crimp over time? I use a Graco paint sprayer for large jobs like houses, walls and linear trim using latex (I'm not a pro). That unit takes a while to clean up and the nozzle tends to clog. While I realize HVLP is best for smaller jobs like cabinets, how does it compare regarding clean up and clogs – if any? Good review – thanks!

  • Frank Does It

    Love my Fuji

  • Ken & Dee Iturrondo

    its not a fugi but it will do

  • John Paul

    thank you, much needed information

  • Leroy Miranda

    Any advise about using them to spraying car paint?

  • Mark Molini

    its not a fuji but it'll do

  • Zackery Whitlock

    It's not a Fuji but it will do


    just got the fuji q5 platinum loved the video very helpful

  • Nick Kai

    One of the reasons that you were not getting a really smooth finish was the type of sheen of the latex paint you were using. Many of major paint brands on the market like Behr their eggshell sheen has a little bit of a texture finish to it when it dries. While some other brands like Sherwin Williams paint their eggshell and satin sheen paints are basically the same and have a smoother finish (texture) . Other than that, Great Video.

  • sebasadam

    It's not a Fuji but it'll do!

  • aejimso

    it's not an HF but it will cost the same.

  • Jurgensenoct tm

    Than You for illustrate me ..

  • Olek Dav

    what abot bosch pfs systems? tested any?
    i have 3000-2 (120$/p) and quite happy with it, in terms of renovation and wall painting tasks.

  • J Flowers

    harbor freight all the way!!!

  • WV FourWheeler

    It's not a Fuji, but it'll do just fine, Mark.

  • Dennis Mathias

    Wow, I sure like the pacing of your reviews. And YOU CAN TALK! Good job. Good luck on the T4! On the orange peel, did the dilution have any affect on that. You diluted the Rockler and not the Fuji–just wondering.

    I mean..it's not a Fuji but it will do! Yea, I know. Too late on this one.

  • Broncort1

    It's a shame you didn't include Apollo in your comparisons, but I understand why.

  • Gotallofthem1

    I know that Turbine Sprayers are different than standard sprayers in that they have larger air but lower PSI. I was looking for something like this (the FUJI), that is portable, that I can put my "Rinseless Car Wash Liquid (basically water), to wash/pre-soak the dirt off my car before I scrub it down.

    Does the liquid that comes out of this have enough power to do this? I mean if you were to put some water in it and hold your hand to the Gun is there enough force coming out?

    Basicllly I want to do what this guy is doing https://www.youtube.com/watch?v=OphLRDt7Yjs, (especially at @47 seconds).
    So can this unit do what the guy in vid is doing? Cause I like the idea of it since it looks more portable


  • MindDezign

    Great video very concise and informative.

  • Roxana Alas

    if not a fuji but it will do the job

  • dwight Garcia

    Hey Wood Whisper, can you also use these systems for spraying paint? Like if you wanted to spray some Wainscoting?

  • Scruf Scruff

    I just don't like the idea of a turbine blowing dust partials all around what I'm painting!!! Any abnormal airflow around a project is not good. Any way an "un-used" air extension hose could be run a distance away from your work? Like if you're inside a garage painting a car, would love for that "un-used" air to be blowing OUTSIDE my shop. Ya know? Or do they do a good job at easing the "un-used" air pressure out? Like when you are not squeezing paint gun trigger…. does a lot of air start blowing out of them somewhere?

  • amilcar rodriguez

    its not a fugitive but it will do.

  • DeirDre Rohr

    Great video!

  • DukeLaCrosse20

    I happened to own a small Bostic compressor for a nail gun.  Its underrated for the job but I bought a harbor freight gravity feed hvlp gun for $16 and it works amazingly well.  I have a really small amount of work to do so $16 is hard to go wrong.  Its a good way to learn about these things and I have learned a ton since dropping the $16 on a lark.  Eventually, I may upgrade.  Its not a fuji, but it'll do.  Haha!  Only a year too late for that, I guess.

  • Hector Gochi

    After spraying cabinets and doors with the Rockler/Harbor Freight HVLP for a few years and going through three machines, I finally went with a Fuji. Glad I did, and this review helped out a lot. Thanks

  • Carmen Del Signore

    It’s not a Fugi, but it will do just fine for what I do. Thank you.

  • Kris Crawford

    It’s not a Fuji but it will do.

  • Joey Moga

    My American Turbine AT953 has out lasted all of the system you covered and has no issues spraying latex based or flecking paints – while spraying lighter materials without any problems.

  • ttryon01

    It’s not a Fuji but it will do.

  • Sean Diaz

    Had the same surgery sir.. love the vids

  • TheRangeControl

    noise levels?

  • Alexander Padron

    Why would you run paint through that set up rather than an airless compressor ? I would personally rather use my fathers graco airless for paint .

  • Daniel Downing

    Thank GOD your are OK with this health issue. May the rest of 2018 be nothing but smile. And may your camels spit nothing but dates. LOL. Keep the vids comin.

  • Doug Fairbanks

    Its not a fuji but it'll do! Love your channel!

  • Really Happenings

    Third nut that's all it was

  • Norman Williams

    it's not a Fuji,but it will do! Thanks for the info it was very helpful .

  • lee mcgehee

    It's not a funk but it will do

  • lee mcgehee

    Meant fugi, can spell check lol

  • Parkway Concepts

    I would recommend a better paint. And yes, that color is awful.

    Thanks for the tips! I have a Graco 3 stage and am wondering how you feel about the procomp accessory? I can't find much on it and am wondering if it is worth the money


    so are the multistage units essentially HVHP High Volume High Pressure? Or Higher Volume Low Pressure? Does the spray gun for the 5 stage unit have larger air holes to deliver greater volume, and the turbine unit just needs to be higher output to keep up with the higher air requirement?
    Is its ability to atomize thicker paint from using larger tip sizes for both the paint orifice and the air holes?

  • Jose Chavez

    It's not a Fiji but it will do!

  • Tom C

    If you have a good air compressor save your money and use that with a good gun! Just another gimmick IMHO!

  • Cheng Liu

    Great video.

  • Tom Costa

    It's not a Fuji but it will do

  • Nate Cougill

    Thanks Marc! This was the perfect answer to a question I had today.

  • g-man

    It's not a Fuji but it will do

  • Matt Keefe

    Well done. Simple and straight forward. Very helpful especially the latex side by side demo.

  • Bob Hale

    its not a fuji but it will do.

  • DIY Dan

    I'm painting new cabinet doors, can I get the same finish with a 1 stage as opposed to a 4 or 5 stage sprayer?, painting with acrylic.

  • Retrogamer1010

    I never knew these existed kinda cool. The homeRite electric sprayer is the same thing all built in to one unit the turbine in part of the gun.

  • Adana Construction 🇨🇦

    Love Turbine systems!

    I have 4 Rocklers units I got cheap. I use one turbine (the others are back-ups in box) but use two guns. One with primer and the other with top coat and they work very well for most applications.

    I also have 2 Fuji units that spray great ! Of course they have better control and better power. I use the Fuji for spraying kitchens and assorted touchup work.

    The Rockler is a fantastic machine for most people that aren’t trades people.

  • Barry Oneill

    Is a turbine the same as a compressor?

  • PDZ1122

    Sprayfine. Way cheaper, high powered. Used it for years, never a problem, great customer service.
    130cfm, 8psi.

  • PDZ1122

    It's not a Fuji, but it will do .

  • Boone Wyatt

    Hey there, I really appreciate the video! Do you recommend airless sprayer‘s for spraying clear coats?

  • Mark Rigsby

    Fuji is the slowest sprayer I have used.

  • Julio Manalo

    It’s not a Fuji but it will do.😁

  • Abhimonnu Biswas

    i am using air compressor for spray painting for almost 4 yr the only problem i am having is the air run out quickly because of less powerful motor and cfm in other hand the turbine spray system gives you a constant airflow which is good but the psi of the turbine system is not enough to handle the large task which is why some people use rotary air compressor

  • Александр

    Я твой рот ебал, с твоим английским!

  • aaron fuksa

    I need a electric battery operated gun or battery powered turbine??

  • Michael Campbell

    Is pre catalyzed lacquer considered a thick or thin finish? Trying to figure out what HVLP can pre cat

  • Don Bushek

    Might the orange peeling be caused by insufficient mixing of the paint and water? Even though the paint is water based, paint doesn't like to be diluted and i would have mixed it much more aggressively after adding the water.

  • Philip Weisby

    Have you tried Wagner flexio sprayer? Thoughts? Love your work by the day!

  • Allen W

    Now all you need is a tractor to spray that orange on. 😉

  • Elaine Riley

    It is not a Fuji but it will do.

  • Jon Woodworker

    If your going to get into the $2000 range. there is only one system to buy.  Kremlin (PERIOD) They can be run off of a pancake compressor.  I run the finishing department for a large cabinet shop and the Kremlin is the only system for a higher end unit.  As always, excellent review, and spot on with the units you reviewed.  For me, I would choose the Harbor Freight, which is he exact same as the Rockler.  With a coupon its $96 or if you wait for a 25% coupon its $90.  You can buy several of these for the price of the others.  And PLEASE, understand, all of these systems are worthless if you don't know how to clean and care for them.  Understand what your spraying and the appropriate cleaner.

  • George Spangler

    How much does the best cost?


    What about Apollo hvlp aerojet f4?

  • Black Menthol

    still have that its not fuji but it will do? 2019 btw

  • *AWW* Arm Wretsling World News

    Hi. Im going start paint cabinet and utility trailers. Does the Fuji Q4 Gold work for what I want? Im look the Q5 platinum its the top of the line of Fuji system but one person offer me one used but in like new conditions one Q4 Gold complete system for $465 included gun kit plus flex extencion plus remote. Want to know if for whats I want do the Q4 Gold work and if the $465 for this Fuji Q4 Gold its ok

  • mikeandikes6

    Great video…

  • Mark Gardiner

    That was a terrific education on these HVLP turbines.regards Mark

  • JAM

    Great video. Helping out us new professionals the knowledge we need to be effective, efficient, and productive. Thank you

  • Gary Tuttle

    One question; will the Fuji G5 spray latex straight from the can without orange peel? I now use an airless Graco that does a very good job, but a pain in the butt to clean. You can't submerge the gun (electri motor).

  • Trọng Hiếu Phạm

    Slowly, plz. I am tired

  • Sean Not-telling

    Well I think I am a bit late to this party. Tell your kid I happen to like that color.
    Do you have any videos on nozzle sizing?

  • Robby Poole

    Excellent video! Excellent demonstration and discussion! Thanks for the insight.

  • Mike NEGAN

    Im a few years late but what the hell
    Its not a fuji but it will do😁😁

  • Jesse Ricks

    It's not a fugi but it will do. Jesse Ricks

  • Jd*7* T.

    I’m not really impressed with these paint sprayers !! They could invent a more exciting & more powerful one ? Just like a portable mini airless paint sprayer !?? 😨😰🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️

  • Dale Romney


  • Mark Man

    It is not a Fuji and it will not do.

  • David Geiger

    I just got a barely used Earlex Spray Port 6003. Do you think it is worth using?

  • Daniel Geng

    Thanks Marc, very useful information. Been thinking about an HVLP and this was a huge help. Hope all is well regarding you recent surgery ~ just realized this is an older video, sooo I guess things turned out ok 🙂

  • Ciudad Oculta™

    It’s not a Fuji, but it will do.
    Still valid?

  • John Stockwell Major Smedley Butler

    If you are HVLP or Airless Spraying without a delay or anti skinning agent then I do not care what you use your finish will not could not ever achieve excellence.
    The single stage units WILL do anything you need without longevity.
    Single Stages require a single item I seldom if ever see recommended A NOTEBOOK! You can achieve excellent products with Patience and a notebook to log your settings for the material you are using! In 30+ years I can simply thumb my notes follow my recipe and be spraying at a high qaulity in minutes. On the flip new products are not an issue either when you have written down a few notes take a moment to locate a similar product and your time of setup and spray will be minimal. A few minutes now will save you an hour later adding and mixing filtering not to mention those human errors….that end up everywhere!

  • motorstock10

    by chnace do you remember which tip size you used in the the FUJI gun for the paint?

  • Lance Warnick

    It's not a Fuji, but it will do.


Leave a Reply

Your email address will not be published. Required fields are marked *