How to create fake teeth in 30 minutes


You will need polymorph plastic Start by heating water to 62°C or 143 Fahrenheit Pour the polymorph plastic pellets into the water and wait until transparent The plastic hardens when it cools down, if it gets too hard to work with just reheat it When it clears up just scoop it up, be careful it’s hot Cut a small piece off, and dye it with food colouring for the gums Ellis piece cooled down too much so she had to reheat it Split the piece in two, leave one in the water Use the other one to make a tiny sausage Dry your teeth and place it over your teeth, make sure it sits properly Wait a few minutes to let it set properly Take it out, it’s okay if it’s still a little soft You can trim off some excess pieces if you like Now we make teeth with the clear plastic Shape your teeth, use scissors to get them really sharp Make them any size you want but not too long or they will hurt when you put them on For comfort and look this is a good length Now make a lot of teeth and use superglue to glue the teeth to the gum You’re going to be using a superglue but not any superglue It needs to have a special active ingredient Cyanoacrylate It’s perfectly safe when it’s dry We checked this with the swedish Poison Information Centre It’s safe to use only if you let it dry properly before you put it in your mouth If you’re too young you shouldn’t be doing this at all so ask for help Be very careful with superglue, or you’ll be stuck forever Just take your time and this will go easy Let the cyanoacrylate set, then put them in to try them on Make sure it fits comfortably Time for the other gum piece Roll it up like we did with the other one Press it over the teeth row to cover the edges of the teeth To really get it in between the teeth we use tweezers Check to see if it really fits when it’s all there before you glue it Take it off and glue it in place on the fake gum Cut off some excess stuff and look at that Paint the teeth with tooth enamel Paint these how you want, we want ours a bit rotten Finish it off with clear nailpolish Help us out by spreading our video all over the internet

100 comments

  • Eli Thompson

    What brand of glue did you use?

    Reply
  • #Lari

    Can do you do a tutorial how to make the theet from the projector scene in the movie it from 2017?

    Reply
  • cris cris original tv

    y donde encuentras las bolitas

    Reply
  • The Mr. J Show

    Screw u and your glue safety crap I'm using hot glue there really FRIGG'IN simple huh?

    Reply
  • Chosen

    What about ethyl cyanoacrylate glue? Or should it just be cyanoacrylate?

    Reply
  • Samantha Ciocco

    Looks like pennywise teeth.

    Reply
  • Kingjohn 2017

    and if you do I wish I could join because I love DIY

    Reply
  • shazsi

    dude when you said about glue you looked angry

    Reply
  • Sean Roads

    Can u apply the teeth without super glue

    Reply
  • Marcella Brittl

    Where did u find those polymorph plastic modeling pellets???????

    Reply
  • Russell Buchanan

    I have been waiting a month on my $60 order from you guys?? You will not return my emails you will not respond yet you have my money??? My son made a project for his mom and we ordered the plastic over a month ago. This is not good business at all? No tracking number no response, nothing. But you have my money. wtf?

    Reply
  • Hailey Billings

    Ashuly I got better idea go pick up some clay at the store and mold some fake teeth and paint it it worked for me 🙂

    Reply
  • CanariaSoy

    Does anybody know where can i find that superglue?? Please !!

    Reply
  • Solenya

    I'd use more red for pennywise and more teeth

    Reply
  • Billy Littlebit

    Sees girl
    Thinks she's pretty
    She smiles with those
    0.0

    Reply
  • leigh the GaMeR pagwagan

    wow

    Reply
  • Tawni Michelle

    Is anyone having an issue with the teeth sticking to the gums?

    Reply
  • Lisa Supprime

    What if you don’t the plastic thing

    Reply
  • rylee W

    Anybody have ideas for a food-safe replacement for the nail polish topcoat?

    Reply
  • Chequered Rose

    Or you can buy some fake teeth

    Reply
  • Silent Dragon

    Those are some pennywise teeth

    Reply
  • blurt Roblox

    Pennywise teeth from IT

    Reply
  • Killer Animations

    I’m doing this with fake blood

    Reply
  • brosis co.

    Omg make pennywise teeth

    Reply
  • BLINK AND ARMY

    I was wondering if not being used how do you store them, you see I wanna be three Finger from Wrong Turn this year and I wanna get a big head start before the actual day

    Reply
  • Tortus will eat your kids

    Help us out, spread this video all over the net! ?

    Reply
  • Mask ‘n Play

    Can you please do Pennywise’s buck teeth and great tutorial

    Reply
  • TheEvrLastingGmr YT

    They look like Pennywise's teeth from the IT 2017 movie when his teeth change form into sharp teeth 🙂

    Reply
  • Blackbeltkitten2 :D

    I love how straight-forward and simple this is, no annoying voices, no over-the-top explanation on human anatomy that confuses people when they aren't looking for an anatomy lesson.
    I haven't looked on your channel yet for this, but I was wondering if you have a tutorial like this but to make some crowded teeth? Like http://harrypotter.wikia.com/wiki/Marcus_Flint has going on (Jamie Yeates actually wore a set of false teeth for the role) They aren't rotten, or genuinely disgusting, but they're incredibly crowded, crooked and twisted

    Reply
  • Judie Jud

    So cool!!!!!!

    Reply
  • Alexandra Armenta

    Is it safe to put polymorph plastic in your mouth for that long?

    Reply
  • Larkspur69

    I’ve done this. Wish I thought to colour gums first. I used a safe pain on them. Inserted “resin” dental prosthetic teeth and a glue gun to melt a socket for each. Cool stuff!

    Reply
  • Chiring Tamang

    Very nice impressed

    Reply
  • Michaela Wickham

    Is there any other type of glue that works that isn't nail or super glue? Like would polydent work for temporary purposes? Or even sticking the hardened teeth into a soft piece?

    Reply
  • open the turd eye

    If it is something we should not do then why would you put it in the video?

    Reply
  • Paul Lopez

    it looks like the teeth of the vampire's from supernatural XD XD XD

    Reply
  • Larry Flip

    Next do the mask

    Reply
  • Cindy Avery

    I don’t need to do any of this because I have two retainers and I use to use one but I don’t so I can just spray paint one of my retainers to make it look like the Joker‘s teeth but there’s teeth on the bottom too so………..

    Reply
  • Totally Acting

    Can you use hot glue from a glue gun for this project

    Reply
  • billspills

    can you use these with braces?

    Reply
  • Nightmare Stanley .

    This will go sooo gooood with the pennywise

    Reply
  • - Nazgûl -

    I have braces and I need to use fake teeth but I don't think I can ?? any ideas?

    Reply
  • FruitRollUp

    This song… makes my ears BLEED.

    Reply
  • Renee Simpson

    Can you use hot glue to stick on the teeth? Or just work some plastic onto the teeth to stick them on?

    Reply
  • Aleksandra Vranjevac

    holy shit it's rami malek

    Reply
  • Unknown

    I am 9 and I made it and I scared my friends :3

    Reply
  • The Matt

    That's the lamest song ever. Haha

    Reply
  • Brittney Lawless

    30 minutes my ass!!! And can someone pleaae tell me where to find superglue?!?! I got the mold done for my mouth, and the teeth done. But i cant find the superglue…

    Reply
  • Souhail Selloum

    Asino

    Reply
  • FanAfLivet

    Hi guys.
    Please help! Where and how do I find the polymer balls you dissolve in water? With hopes and regards Justian

    Reply
  • Vixanne Darkfairy

    Would you please link the tan enamel you used to decay them?

    Reply
  • 6 pets and a girl

    I'm gonna use this to make my penny wise costume it's my first time making prosthetic by myself usually my brother helps so wish me luck

    Reply
  • 6 pets and a girl

    I'm gonna be penny wise and hand little kids balloons so when they go back to there friends or parents they can say a nice clown named penny wise gave them a balloon ?

    Reply
  • Jennifer Hafler

    Hey does anyone know how many grams of polymorph plastic I need to make 3 sets of teeth? Thank you!!! 🙂

    Reply
  • Cheese & crackers

    Creepy

    Reply
  • The Story Fire

    I first watched this and thought. "Hah, I'm artistic. I'll make a better looking set than this on my first try." Wow was I wrong. I'm on like attempt number 6 and ALMOST got a usable set of teeth this time. Luckily the plastic is reusable and I make a little progress with each attempt.

    Reply
  • sarah miratana

    i cant wait to try tjis. im hitting ebay right now!

    Reply
  • Brucifer Mephistopheles

    If you have any undercuts in your teeth you'll have one hell of a time getting them out after they cool….

    Reply
  • xXfmn

    Is it clean?

    Reply
  • Kayce Meadows

    This only works if your teeth are straight lol found that out the hard way ?

    Reply
  • Foxiepaws ACAnderson

    Super glue (cyanoacrylate) was originally made as an alternative for stitches in battle during the Vietnam War…it probably saved quite a lot of people and even though it is body safe, it will bond skin instantaneously and you will require hospital if you get it in your eyes or mouth while it's still liquid. Make sure you apply the teeth while it's away from your face and mouth!

    Reply
  • Foxiepaws ACAnderson

    This is brilliant when you look at how expensive fake SFX teeth are…these are custom made too!

    Reply
  • Shawn Anthony

    Look like venom

    Reply
  • Mutte Da pug

    Hej på dej??????

    Reply
  • luan sternchen

    Does anybody know if it's safe to use alcohol activated paint instead of tooth enamel? Or is that toxic if you put that in your mouth?!

    Reply
  • Thor Asaheimr

    Ops. Cyano doesn't work at all, nor the color did.. :'(

    Reply
  • Apple Pie

    I'm looking to just make front teeth (buck teeth might be the best way to describe). How would I go about doing this and getting them to stay put since I won't be doing a whole upper plate?

    Reply
  • Валерия Кацубо

    What kind of glue?

    Reply
  • Emily snith Beauty blog

    ??????????????????????????????????❤❤❤❤❤❤❤❤?????❤❤❤❤❤❤❤❤❤❤❤❤

    Reply
  • Timothy Managhan

    Oh my gosh thank you so much , now i can make this for my Jim Carrey Mask cosplay

    Reply
  • Richard Lopez

    Failed twice. Wear gloves for the food coloring part. If you didnt and made a mess of your hands then use toothpaste and a brush to remove the stain off of your hands.

    1st one I made the teeth to big. 2nd try the main part got too tight so I couldn't put it on. Although the teeth looked really good. Trying again tomorrow.

    Reply
  • Leo Dixon

    00:00 song ?

    Reply
  • Mad serpent

    I created a bottom jaw, it looked awesome.

    Reply
  • Dangerous Dan

    this is bullshit all it does is stick to my fingers!

    Reply
  • Olah Cristi

    Why dont you just use more polymorph plastic instead of super complicated glue ?

    Reply
  • edgy spoon

    Yay! Now i can make a teeth for my teddy bear

    Reply
  • FunkyGoodVibes

    Can't get the food colouring to work for the gum colour.

    Reply
  • Dilprince Dastan

    can I order polymorph from india ?

    Reply
  • Spongeycraft

    Would like to use this to make teeth from The Mask

    Reply
  • Wizard Of Hue

    I tried doing this but its really crumbly or its a liquid

    Reply
  • Cris Elias

    Q es lo q le pone al agua??

    Reply
  • jay Batbear

    What paints do you use ?

    Reply
  • Slider 27

    Oh my gosh this is soo helpful. Me and my cousins make movies and I wanted on scene to have the monster show scary teeth but I did not know have to do that but you helped sooo much. Thank you soo much!!!

    Reply
  • Slider 27

    Just subscribed can’t wait to see what els you guys have on this channel

    Reply
  • Second life Smith Family

    you could legit make veener

    Reply
  • Cat Lover

    Guys if i die it will be your fault????

    Reply
  • LiBenn Creations

    Also u can use denture glue to glue the fake teeth onto the gum mold denture thing 😀 its available at walgreens

    Reply
  • Jessica James

    Hey, I have a request: Can you guys make a wolf face mask next?

    Reply
  • gabriellez613

    i have this plastic but the problem i have with it is that it hardens a bit smaller so it's hard to get on and off and kind of hurts…

    Reply
  • gabriellez613

    what kind of dye? my dye didn't mix with the plastic

    Reply
  • EmAnd Syd

    Will the teeth stay on pretty well? Or could we use denture glue?

    Reply
  • Michael Char

    Amazing tutorial!!!

    P.S. With or without those teeth,I would`ve definetily reached for her number)))

    Reply
  • Rainbow Wolf

    I want teeth like a wolf

    Reply
  • kelly Niszczak

    Hopefully I can put these over my braces for pennywise this halloween?

    Reply
  • Jeff Parker

    Thank you now i became pennywise

    Reply
  • BeeBunn 678

    Go to store. 20 minutes. Looking for the right product 6 minutes. Getting the better product 13 minutes looking for the first product because the second one was too expensive 4 minutes going back home 17 minutes. Getting everything 10 minutes… I timed everything..

    Reply
  • Millicent Rodriguez

    Where do I get that paint from?

    Reply
  • Vivian Capó

    It's not real

    Reply
  • Someone Important Animations

    “Make it into a tiny sausage and Stick it in your mouth” ??????

    Reply
  • Pennywise The dancing clown

    Using it for pennywise

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *