Plaster Sprayer | 3 Jet Wall Gun Feature Video


this is the Three Jet Wall Gun by ToolCrete made in the USA this is a pneumatic hand
tool which connects to an air compressor and can be used to spray high viscosity
cementitious mixes including stucco plaster concrete and even fibered and
aggregate filled mixes like gfrc or mixes with small pebbles colored glass
and more simply connect the air valve to the optional green air tube and then to
the hopper use an appropriate fitting to connect the 3/8 inch or half inch inside
diameter air hose to the cp5 automotive fitting on the sprayers air valve to
begin spraying we recommend a compressor that is either
gas or 220 volt electric with a minimum specification of five horsepower seven
CFM and 90 psi this will give strong continuous air
flow for greatest spraying power the Three Jet Wall Gun may be adjusted to
work with just the single center jet when using a smaller compressor this will direct all of the air power
into the one center jet simply use the blank brass jets and black rubber
stoppers that are included to make the necessary adjustments using a mortar
sprayer overhand traveling can reduce application time by more than half and
cut labor needs by even more simply spray the material
onto your substrate and follow up by traveling it smooth and even some project examples include
traditional three coat stucco thick carving mixes for decorative projects
earth-based mixes gfrc mixes for sculptures concrete countertops and form
work ferrocement papercrete and more this sprayer is ideal for small to
medium sized projects or spray applications will be onto walls for a
slightly downward position for medium to large projects or if you’ll be sprayed
onto ceilings take a look at our other sprayers
available at mortarsprayer.com or call to discuss your project

Leave a Reply

Your email address will not be published. Required fields are marked *