Paint a Car Like a Pro – Use the Concours Pro HVLP Paint Gun Kit – Eastwood

a spray gun is not going to paint your car that’s up to you but what a good spray gun can do is give you the ability to focus on technique and on painting and not on the equipment and that’s where the concourse pro two gun set comes in this set comes in its own carrying case so your equipment is always safe and always at a body shop tests the full-size gun comes with a 1.3 1.7 and

Read more

HVLP vs Conventional vs LVMP Trans Tech Paint Spray Guns

– All right, today we’re gonna cover the three types of air caps that are available for spray guns. Most top-end spray guns like those from Binks and DeVilbiss, along with others, offer an LVMP, conventional or HVLP cap, and that can be very confusing thing for a lot of people. So we’re gonna show you each gun with two different materials. One’s about the consistency of latex. We’ll show you what the caps do well and struggle with when

Read more

스프레이 건 세척 방법 (분해와 조립까지) how to clean spray gun, 자동차 도장 다큐

안녕하세요. 차화백입니다. 이번에는 스프레이 건 세척 방법에 대해서 알아보도록 하겠습니다. 건 세척하는 것. 사실 별 것 아닌 노하우고 정비공장 도장부 생활을 한 사람이라면 누구나 쉽게 할 수 있는 일이지만 건 세척하는 방법을 알려달라는 요청이 있어서 이렇게 영상으로 만들어보게 되었습니다. 스프레이 건은 정교한 장비이긴 하지만 관리만 잘하면 굉장히 오래 쓸 수 있는 물건입니다. 관리방법은 별 것 없습니다. 칠 뿌리자마자 곧장 깨끗하게 세척해주면 됩니다. 저희 공장에서 막후끼로 쓰고 있는 흡상식 스프레이 건입니다. 이름은 데빌비스 JGX 502 입니다. 대체로 흡상식 건이 중력식 건보다

Read more

DIY Spray Gun Tips – Choosing The Right Spray Gun For The Job

-Hey, this is Donnie Smith, and today we’re going to talk about selecting the correct paint for the product that you’re spraying. For example, a lot of times a spray gun will be used for primer surfacer, base coat, clear coat, and so forth. It does take a different gun for different products that you use. If you try to use one gun for everything, it’s gonna lead to a lot of problems. So first, let’s start out talking about

Read more

How to Disassemble and Reassemble Neo CN/BCN Airbrush

How to disassemble the Neo for Iwata CN and BCN Airbrushes. The first step is to remove the handle. Next, loosen the needle chucking nut and carefully remove the needle. Now fully remove the needle chucking nut. Remove the spring guide, followed by the needle spring. In an upward motion, remove the needle chucking guide. The clip on the end is attached, so you don’t have to worry about another piece. Now remove the main lever, or trigger. Note the

Read more

การพ่นสี กันพลา แบบไฮไลท์ : Gundam(Gunpla) Airbrush High light/Shading

Hello there, welcome to EZHow channel This video is about painting with airbrush. Shading Style or you can call Highlights style For paint with shading style will make your models look more realistic. Regulating the air pump , the pressure is less than normal painting and you have put more thinner when painting as well. The question why we have to use lower pressure and more thinner for painting Because we have to make the airbrush sprays out with just

Read more